You are here:  Home > Magnetic Separation Equipment > Grate Magnets

Grate Magnets

       Bookmark & Share  
 
MADE IN USA
 Download Grate Magnet Data Sheet Grate Magnets/Bar Magnets/Grate Magnet Separators/Magnetic Grates
Grate Magnet
 
Grate Magnets are placed directly in the product stream allowing free flowing products to come in direct contact with the grate. Grate Magnets are typically constructed with one inch diameter magnetic tubes mounted on two inch centers in a frame. The length and width can be fabricated to any dimension, usually in two inch increments.
 
Grate Magnets offer excellent protection from metal contamination. As product flows over the magnetic tubes, captured metal contaminants are pushed to the underside of the tube where they are now out of contact with the product flow preventing washoff back in to the clean material.
 
Cleaning is achieved by removing the Grate Magnet and wiping the magnetic tubes clean. It is important to keep in mind that by placing a Grate Magnet in the product flow, you will be reducing fifty percent of your flow through area. Grate Magnets should be sized so they do not impede the flow of product.
 
Magnetically engineered to provide a full range of ferrous metal separation from free-flowing products with gravity fall processing applications. Puritan's designs offer maximum capture, control and protection of equipment while improving product purity. For maximum protection, locate in critical areas where capture is possible, most needed, and where removal for cleaning is feasable. Grates are most effective when the product is dry, free flowing and does not bridge between the magnetic tubes (Puritan also offers other magnetic designs for those more difficult applications). Select a Magnetic Grate at least twice the cross sectional area of the incoming spout opening and discharge. When in doubt, phone Puritan for engineering assistance.

 
Construction:
  • Highest grade of magnet material including Neodymium-Iron-Boron (rare earth), Samarium-Cobalt (rare earth), Ceramic and Alnico
  • 1/8" thick x 2" tall stainless steel support stringers welded to tubes
  • Rugged, high strength designs
  • Seam welded tube ends (Finish Specifications)
  • 100% stainless steel enclosed construction
Options:
  • 316L stainless steel and other alloy construction
  • Special sizes on request
  • E-Z Clean™ options
  • Round sizes available
  • Non-standard tube spacing
 
 
Note: Much of our downloadable literature is in Adobe Acrobat (PDF) format. You will need Adobe Reader to view these files. Click HERE to get Adobe Reader.


Download Grate Magnet Data Sheet
More Info

Contact Us

Magnetic Materials

Request a Quote

Download Grate Magnet
Data Sheet


Product Finish Specifications

Custom Designs

Inspection and Testing

Additional Magnetic Separation Equipment:

Drawer Magnet 

Plate Magnet

Suspended Magnet

Head Pulley

Vertical Spout Magnet

Rotating Drum Magnet

Air Vey Magnet

Hump Magnet

Liquid Trap Magnet

   
 © 2006 - 2014   Puritan Magnetics SiteBuilder by AccuNet